CX5130 | Embedded PC with Intel Atom® processor
Giới thiệu về máy tính nhúng Beckhoff CX5130:
The CX5130 has an Intel Atom® multi-core processor with a clock rate of 1.75 GHz. This makes genuine multi-core technology possible in the Embedded PC segment. The hardware interfaces in this series are oriented and implemented identically to those of the existing CX5000 series. Two independent, Gigabit-capable Ethernet interfaces as well as four USB 2.0 and a DVI-I interface are available. A multitude of further connection options and gateway functions is created by an option interface, which can be pre-equipped ex factory, as well as the I/O level, which can optionally consist of either E-bus or K-bus terminals.
The CX5130 is characterised by low power consumption and fanless design.
Depending on the installed TwinCAT runtime environment, the CX5130 can be used for implementing PLC or PLC/motion control projects with or without visualisation. The execution of motion control applications with interpolating axis movements is also possible.
Like the CX5000, the CX5100 series has a compact design; a modular device with extension modules like in the CX2000 series is not available.
Mã đặt hàng:
- CX5130-0100 no operating system, no TwinCAT
- CX5130-0110 Windows Embedded Compact 7, no TwinCAT
- CX5130-0111 Windows Embedded Compact 7, TwinCAT 2 PLC runtime
- CX5130-0112 Windows Embedded Compact 7, TwinCAT 2 NC PTP runtime
- CX5130-0113 Windows Embedded Compact 7, TwinCAT 2 NC I runtime
- CX5130-0115 Windows Embedded Compact 7, TwinCAT 3 runtime (XAR)
- CX5130-0120 Windows Embedded Standard 7 P 32 bit, no TwinCAT
- CX5130-0121 Windows Embedded Standard 7 P 32 bit, TwinCAT 2 PLC runtime
- CX5130-0122 Windows Embedded Standard 7 P 32 bit, TwinCAT 2 NC PTP runtime
- CX5130-0123 Windows Embedded Standard 7 P 32 bit, TwinCAT 2 NC I runtime
- CX5130-0125 Windows Embedded Standard 7 P 32 bit, TwinCAT 3 runtime (XAR)
- CX5130-0130 Windows Embedded Standard 7 P 64 bit, no TwinCAT
- CX5130-0135 Windows Embedded Standard 7 P 64 bit, TwinCAT 3 runtime (XAR)
- CX5130-0140 Windows 10 IoT Enterprise 2016 LTSB 32 bit, no TwinCAT
- CX5130-0141 Windows 10 IoT Enterprise 2016 LTSB 32 bit, TwinCAT 2 PLC runtime
- CX5130-0142 Windows 10 IoT Enterprise 2016 LTSB 32 bit, TwinCAT 2 NC PTP runtime
- CX5130-0143 Windows 10 IoT Enterprise 2016 LTSB 32 bit, TwinCAT 2 NC I runtime
- CX5130-0150 Windows 10 IoT Enterprise 2016 LTSB 64 bit, no TwinCAT
- CX5130-0155 Windows 10 IoT Enterprise 2016 LTSB 64 bit, TwinCAT 3 runtime (XAR)
- CX5130-0160 Windows 10 IoT Enterprise 2019 LTSC 32 bit, no TwinCAT
- CX5130-0161 Windows 10 IoT Enterprise 2019 LTSC 32 bit, TwinCAT 2 PLC runtime
- CX5130-0162 Windows 10 IoT Enterprise 2019 LTSC 32 bit, TwinCAT 2 NC PTP runtime
- CX5130-0163 Windows 10 IoT Enterprise 2019 LTSC 32 bit, TwinCAT 2 NC I runtime
- CX5130-0170 Windows 10 IoT Enterprise 2019 LTSC 64 bit, no TwinCAT
- CX5130-0175 Windows 10 IoT Enterprise 2019 LTSC 64 bit, TwinCAT 3 runtime (XAR)
- CX5130-0185 TwinCAT/BSD, TwinCAT 3 runtime (XAR)
Các module tùy chọn cho CX5130:
- CX5130-N010 DVI-D interface, additional DVI-D port for clone or extended display mode.
- Is not supported by Windows Embedded Compact 7 or TwinCAT/BSD.
- CX5130-N011 DisplayPort interface, additional DisplayPort for clone or extended display mode.
- Is not supported by Windows Embedded Compact 7 or TwinCAT/BSD.
- CX5130-N020 audio interface, 3 x 3.5 mm jack sockets, Line In, Mic In, Line Out or 5.1 Surround
- CX5130-N030 RS232 interface, D-sub plug, 9-pin (RXD, TXD, RTS, CTS)
- CX5130-N031 RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on
- CX5130-N031-0001 RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on
- CX5130-N031-0002 RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off
- CX5130-N031-0003 RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off
- CX5130-N031-0004 RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on
- CX5130-M112 2 x EtherCAT master interface
- CX5130-B110 EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45)
- CX5130-M310 PROFIBUS master interface, D-sub socket, 9-pin
- CX5130-B310 PROFIBUS slave interface, D-sub socket, 9-pin
- CX5130-M510 CANopen master interface, D-sub plug, 9-pin
- CX5130-B510 CANopen slave interface, D-sub plug, 9-pin
- CX5130-M930 PROFINET RT, controller interface, Ethernet (2 x RJ45 switch)
- CX5130-B930 PROFINET RT, device interface, Ethernet (2 x RJ45 switched)
- CX5130-B950 EtherNet/IP adapter interface, Ethernet (2 x RJ45 switched)
Phụ kiện khác:
- CX1900-0101 DVI-to-VGA passive adaptor for connecting a standard desktop VGA monitor to the CX system (singles out the VGA signals of the DVI-I interface).
- CX1900-0102 Spare battery suitable for CX10x0, CX81x0, CX50x0, CX51x0, CX52x0, CX90x0, CX20xx
- – lithium button cell type CR2032, 3V/225 mAh
- – follow polarity when installing
- CX1900-0122 512 MB microSD card
- CX1900-0124 1 GB microSD card
- CX1900-0126 2 GB microSD card
- CX1900-0128 4 GB microSD card
- CX1900-0130 8 GB microSD card
- CX2900-0026 20 GB CFast card, 3D flash, extended temperature range (only for Windows CE or TwinCAT/BSD operating systems)
- CX2900-0038 40 GB CFast card, 3D flash, extended temperature range
- CX2900-0040 80 GB CFast card, 3D flash, extended temperature range
- CX2900-0042 160 GB CFast card, 3D flash, extended temperature range
Đăng nhận xét Blogger Facebook